LoveHolic Studio Firefly Figure: Magnetic Assembly in 1/4 and 1/7

Assembly is the part nobody talks about.

LoveHolic Studio’s Firefly figure takes a different route. The Honkai: Star Rail release arrives pre-painted and uses magnetic components, so the pieces seat against each other rather than requiring glue or force.

It ships in two sizes. The 1/4 build stands about 46 cm, and the 1/7 build about 25 cm.

Pre-orders run at $69 for the deposit and $309 for full payment.

What Magnetic Components Change

Magnets remove the two worst outcomes of a finished figure: a part that will not seat, and a part that will not come apart again.

That matters more than it sounds for a design with several sections, because owners reconfigure displays far more often than they expect.

The trade-off is a lighter connection than a mechanical joint, so handle the pieces by their structure rather than the sculpted surface.

The 1/4 and 1/7 Choice

Twenty-one centimetres separate the two builds, and that gap decides the shelf.

The 1/4 version needs a deep surface and clear headroom. Place it where nothing hangs above it.

The 1/7 version is the desk-scale option. It fits a riser, a cabinet shelf or a monitor-side position without dominating the space.

If you cannot decide, measure the intended surface first. Firefly’s design reads well at both sizes.

The Firefly Figure Finish

LoveHolic lists UV-varnished eyes and a smooth skin-like finish, which are the two details that separate a finished figure from a painted model kit.

Varnished eyes hold a highlight from any angle, so the face stays readable in low display light.

The skin finish is harder to judge from photographs. Look for even tone across the arms and face in the gallery, since patchiness is the most common complaint at this scale.

Non-Removable Clothing

The studio revised this release into a mass-market version with permanently attached clothing.

That is worth reading carefully, because the original listing described something else. Buyers who ordered on the earlier specification should check what they are receiving.

For everyone else, the change simplifies handling. There is nothing to remove, nothing to store loose, and nothing to lose.

That finish is the reason the Firefly Figure costs more than a standard PVC release at the same scale.

Materials and Weight

The build uses PU, ABS and PVC.

That combination keeps a 46 cm figure light enough to be moved by one person, while still holding the sharper edges of the costume detailing.

Support the base when lifting rather than the torso, especially on the larger version.

Pricing and Timing

The range is $69 for the deposit and $309 for full payment.

The listing carries the original schedule of Q3 to Q4 2024, which is now behind us. Treat the current release date as unconfirmed until the studio updates it.

Shipping is quoted separately and depends on which scale you order.

Display and Care

Light the figure from the front at roughly eye level and keep it out of direct sun.

Dust with a soft brush. Where the surface needs more, use lukewarm water with a drop of mild soap and dry it completely before reassembly.

Store the spare magnetic sections in the original packaging.

Who the Firefly Figure Suits

Honkai: Star Rail collectors who want a finished piece rather than a kit will find this the easier purchase.

It also suits anyone with limited display space who would rather choose a scale than accept one, and collectors who value reconfigurable pieces over fixed poses.

Pre-Order the Firefly Figure

Both scales are open for pre-order with deposit or full-payment options. Current pricing and availability are listed on the product page.

Check the Firefly figure pre-order on TopGK

Would you take the Firefly figure at 1/4 for the presence, or 1/7 to keep the shelf intact?