AT Studio Taihou: Character Cues and Cabinet Fit

The appeal of Taihou is easy to see, but a statue has to earn its space after delivery. AT Studio describes this 1/6 statue with material PU, Resin; edition of 88 pieces; current release estimate Q2 2027. My first pass would be the footprint, followed by the parts of the costume or pose that are most exposed. Those are the details that affect daily ownership.

AT Studio presents Taihou from Azur Lane as a 1/6 statue. The listing shows material PU, Resin; edition of 88 pieces; current release estimate Q2 2027.

If you search for Taihou AT Studio 1/6 statue, use the specification snapshot below to compare the exact release. For a nearby comparison, the guides to Aeterna Studio Miyamoto Rei: What the Listing Confirms and Rei Ayanami statue: What to Check in the Product Photos are more useful than judging this release in isolation.

Official product image of Taihou statue by AT Studio
Taihou by AT Studio, shown in the product listing

Shelf depth and viewing height

The current listing does not give complete height, width and depth figures for Taihou. Use that as a starting point, but measure the full base and the furthest point of the pose. A statue that fits the shelf from the front can still foul the door by only a centimetre or two.

Leave enough clearance around Taihou to lift it by the base. Moving a tall or irregular piece by the head or an outstretched limb is one of the easiest ways to damage paint.

Keeping the paint and small parts safe

The listing names PU, Resin for Taihou. For resin or resin-adjacent surfaces, keep strong heat and prolonged direct sun away from painted edges. Start dusting with a soft dry brush at the highest details, then work downward so loosened dust does not collect in the base. Keep the statue away from direct sunlight and rapid temperature changes.

Edition, variant and production updates

Production for Taihou is currently shown for Q2 2027. The page also states 88 pieces. Match those details to the option in the cart, especially if the page shows more than one finish, scale or bundle.

Taihou: Keep the order confirmation and check it against the release name later. If the timing matters for a gift or display event, ask for the latest update before making plans around it.

Reading the pose beyond the front photo

At ordinary viewing distance, the outline of Taihou should remain clear before any small surface detail comes into view. Look for a clean profile in the face, hands, hair or clothing, then see whether the base supports the pose without pulling attention away from it.

The product photos for Taihou are most useful when compared as a set. One angle shows the face, another may expose the rear of the base or the support under a cape. If an angle is missing, ask before assuming that the shallowest photo represents the real footprint.

A good place for it on the shelf

A useful test is whether Taihou remains recognisable after two neighbouring releases are added. Reserve the base area first, then fill the background. Aeterna Studio Miyamoto Rei: What the Listing Confirms and Rei Ayanami statue: What to Check in the Product Photos offer two nearby references for scale and display role.

Specification snapshot

These are the listed specifications rather than assumptions from the product title.

Studio / BrandAT Studio
CharacterTaihou
Series / IPAzur Lane
Product typestatue
Scale1/6
MaterialPU, Resin
Edition88 pieces
Estimated releaseQ2 2027

Ordering without avoidable surprises

For Taihou, make the product page and cart agree before payment: character, manufacturer, scale, parts and price. The current production estimate is Q2 2027; confirm it again when ordering. The character name alone may not identify the exact version.

Frequently asked questions

What should I measure first?

For Taihou, measure the base, the tallest point and the forward projection of the pose. The listed height alone can make a deep statue look easier to place than it is.

What material is listed?

Taihou is listed in PU, Resin. Follow the seller’s care instructions for the final surface.

Is there an edition size?

The Taihou listing states 88 pieces. Confirm that the number applies to the exact version you intend to buy.

What should I check before payment?

Confirm the exact Taihou option, included parts, dimensions, price and current release estimate. Keep a copy of the checkout information in case the listing changes.

Where can I find the size?

The current listing does not show a complete dimensions set. Confirm height, width and depth before ordering.

Related collector reading

More collector reading on similar formats and display planning:

Final check

For Taihou, start with the footprint and the exact version. Production is currently shown for Q2 2027, so confirm any update before final payment.

View the Taihou statue listing on TopGKStore for current images, variants, price and availability.

Leave a Reply

Your email address will not be published. Required fields are marked *